Precision Armament M4-72 Severe-Duty® Compensator 7.62mm/.308 5/8×24 Thread – International Shooting Supplies
Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. The M4-72 is an extremely lightweight (2.6 oz) and compact design that delivers industry leading recoil reduction of up to 75%. Closed bottom construction combined with upward biased venting ef
Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. The M4-72 is an extremely lightweight (2.6 oz) and compact design that delivers industry leading recoil reduction of up to 75%. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from heat treated stainless steel for superior durability, the M4-72 can withstand the extreme heat of combat conditions without being subject to rapid erosion. Available with an advanced Ionbond® high temperature CrCN coating (matte black), or stainless steel in-the-white (satin grey). Accu-Washer™ Muzzle Alignment System required for installation.
.308/7.62mm model is designed to fit any caliber from .243 Winchester up to and including 338 Lapua Magnum (6.5 Creedmoor, 308Win, 300WM, 30-06, 338LM, etc.) and features 5/8-24 threads. Delivers industry leading recoil reduction of 65-75% depending on the cartridge.
Features:
74% recoil reduction
Innovative reverse venting, triple baffle design
Upward gas biasing to mitigate muzzle rise, as well as a closed bottom to eliminate dust signature
Will accept many devices designed to fit over the standard A2 flash suppressor
Built for Severe-Duty®
Industry Leading Performance
Innovative reverse venting triple baffle design provides the highest level of recoil reduction and muzzle control on the market. Delivers over a 70% reduction in recoil energy for most cartridges.
Effortless Muzzle Control
Side vents are precisely canted upward to eliminate muzzle climb resulting in near zero
muzzle movement while also minimizing dust signature when shooting prone.
Compact Rugged Design
FEA optimized for maximum durability and impact resistance in a compact, lightweight package.
Superior Heat & Corrosion Resistance
Precision machined from heat treated stainless with a high temperature Ionbond® CrCN matte black finish for superior durability. The M4-72 can withstand the heat of combat conditions without being subject to rapid erosion.
Perfect Bore Alignment
High tolerance class-III threads machined in same operation as bore aperture to guarantee perfect concentricity for optimum accuracy.
Specs:
Performance (Relative to Bare Muzzle/Thread Protector):
Primary Muzzle Device Type
Muzzle Brake
Recoil Reduction* (%)
64
Gas Blowback at Shooter's Position
Moderate-high
Backblast Zone (Degrees)
60
Concusiveness
Moderate
Muzzle Flash Increase
Moderate-high
Follow Up Speed
Increased
Utility:
Timing Required
Yes
Built-in Indexing
No
User Tunable
Port/Baffle Orientation
Field Removable by Default
No
Ease of Cleaning
Good
Blast Shield Interface
None
Physical:
Thread Size (in)
5/8 - 24
Material
HTSR 416 Stainless Steel Bar, HRC 26 - 32
Finish
Black CrCN
Bore Clearance (in)
0.368
Max Baffle Angle (Degrees)
~90
Length (in; cm)
2.275; 5.7785
Width (in; cm)
0.985; 2.5019
Height (in; cm)
~0.9; 2.3
Weight (oz; g)
3.1; 87.8835
Known Compatible Calibers
308 Win, 30-06 Sprg, 300 Win Mag
Additional Information:
*Recoil reduction measured on high precision recoil pendulum from a 16 barrel using 147Gr FMJ .308 Winchester.
I don't see my caliber listed, which one do I select?
When selecting a caliber for one of our muzzle devices, the correct choice is based on your cartridge's actual bullet diameter. For example; if you have a .300 Win Mag, you would select a 7.62/.308 muzzle device. This is because the bullet for that cartridge is a .308 diameter.
Warning: Reverse venting design may cause excessive blast/concussion on barrels shorter than 14.5 and on bullpup style rifles.
Can I put this on my shorter-than-14.5 barrel?
You can, we just don't really recommend it. Reverse-venting brakes do just that; vent gases in the reverse direction from where they were traveling. This design is how such high recoil reduction ratings are achieved. But because of that, gases and concussion are directed back to the shooter. Barrels below 14.5 can cause these forces to be quite drastic to some individuals, and more extreme depending on what caliber you are shooting.
Manufacturer SKU
A04020
Disclaimer:
Manufacturers, importers, suppliers, and distributors may make changes to their products without fanfare. Such changes can lead to discrepancies between the advertised product and the actual product in inventory. While International Shooting Supplies Ltd. endeavors to correctly describe the actual product in inventory, we will not be responsible for unintentional inaccuracies in text and images of the advertised product.
Precision Armament M4-72 Severe-Duty™ Compensator 5/8-24
Precision Armament M4-72 Severe-Duty Compensator Up to 10% Off 4.7 Star Rating w/ Free Shipping and Handling
Precision Armament products for sale at Wing Tactical
Precision Armament M4-72 Severe-Duty Compensator Up to 10% Off 4.7 Star Rating w/ Free Shipping and Handling
Precision Armament M4-72 AK-47 Severe-Duty® Compensator
cdn11.bigcommerce.com/s-g64i9l/images/stencil/300x
Precision Armament M4-72 Severe-Duty Compensator Up to 10% Off 4.7 Star Rating w/ Free Shipping and Handling
Precision Armament M4-72 Severe-Duty Compensator 7.62mm/.308Cal, Matte Black, A04020 - $80.74 (Free S/H over $49 + Get 2% back from your order in OP Bucks)
Precision Armament M4-72 Severe-Duty® Compensator
In Stock Precision Armament M11 Brakes and M4-72 Compensators - Page 2
Precision Armament M4-72 Severe-Duty Compensator [BEST CHOCE]
Precision Armament M11 Severe-Duty® Muzzle Brake
cdn11.bigcommerce.com/s-g64i9l/images/stencil/orig
Precision Armament M4-72 AK-47 Severe-Duty® Compensator
Precision Armament M4-72 Severe-Duty Compensator Up to 10% Off 4.7 Star Rating w/ Free Shipping and Handling